EasyManua.ls Logo

Megamaster 750 User Manual

Megamaster 750
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
BUILTIN GAS BRAAI
MODELS: 750, 1000
INSTALLATION INSTRUCTIONS & USER MANUAL
Actual product may differ slightly from the picture above
Megamaster products and factories comply with the Quality Management System standards required by all
major retailers in South Africa.
Question and Answer IconNeed help?

Do you have a question about the Megamaster 750 and is the answer not in the manual?

Megamaster 750 Specifications

General IconGeneral
BrandMegamaster
Model750
CategoryIndoor Fireplace
LanguageEnglish

Summary

Megamaster Built-In Gas Braai

Features

Stainless Steel Gas Braai

Details the H-shaped cast iron burner, piezo igniter, drip tray, lava rocks, and gas regulator.

Light Fitting

Describes the ceramic light fitting, its mounting, and bulb type.

Potjie Hook

Specifies the Potjie hook's capacity and location on the braai.

Rotating Cowl & Base

Explains the function of the cowl and base for rain prevention and mounting.

Flue Pipes and Dimensions

Flue Pipes - 45 Degree Bends

Information on 45-degree flue pipe bends for installation.

Sizes and Measurements

Provides dimensions for constructing the brickwork for braai models.

Installation Guide

Warranty and Rust Prevention

Details the 15-year limited warranty and precautions against rust.

Construct Support Walls & Gas Connection

Instructions for building support walls and making gas pipe connections.

Unit Insulation and Expansion Gaps

Guidance on insulating the unit and maintaining expansion gaps.

Electrical Wiring and Chimney Height

Provision for electrical wiring and importance of chimney height for draw.

Chimney Dimensions and Flue Linings

Requirements for chimney inner dimensions and benefits of steel flue linings.

Roof Waterproofing and Flue Offsets

Instructions for roof waterproofing and supporting flue offsets.

Rotating Cowl and Base Installation

Details on installing the rotating cowl, its base, and ensuring levelness.

Finishing and Cowl Maintenance

Painting exposed parts and greasing the rotating cowl axle.

Knob Installation

Instructions for fitting the brass knob supplied with the unit.

Operation and Maintenance

Initial Setup and Regulator Connection

Steps for removing components, connecting the regulator, and placing stones.

How to Light the Braai

Step-by-step guide for igniting the braai burner.

Do's and Don'ts

Essential safety guidelines and operational tips for using the braai.

General Maintenance

Cleaning procedures for the stainless steel braai and top grill.

Burner Maintenance

Recommended cleaning and maintenance for braai burners.

Troubleshooting Common Issues

Addresses common problems like non-function, flame color, and obstructions.

Ignitor Failure Procedure

Instructions for lighting the braai when the ignitor fails.

Related product manuals