7. The igniter is fitted with a penlight battery. To replace the battery, simply unscrew the front of
the igniter and remove the old battery.
HOW TO LIGHT THE BRAAI IF IGNITOR FAILS:
1. Close the gas valve on braai.
2. Open the tap on gas bottle and listen for any gas leakage. Repair if necessary.
3. Light a candle or use a special gas lighter.
4. Hold the flame 75mm above the burner.
5. Now open the gas valve on the front table.
6. The gas burns in small blue flames of 4 rows.
REMEMBER - FIRST THE FLAME AND THEN THE GAS.
Gas consumption for normal braai: 1/2 kg per hour per burner.
Camping fitting to bull-nose adaptors are available from the manufacturer for the use with smaller gas
cylinders.
To Previous Page
Loading...
