EasyManua.ls Logo

Megamaster Blaze-300 - ASSEMBLY INSTRUCTIONS - GAS SYSTEM; Propane Tank Installation; Propane Hook-Up Procedure

Default Icon
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
B
15. Liquid Propane Tank Installation
From rear of grill place the LP gas cylinder
into the Bottom Panel (B) hole
As shown in Fig. 20.
16. Liquid Propane Hook-Up
Attach the regulator to the propane cylinder by
turning the regulator handle clockwise as shown
in Fig. 21. If the outdoor cooking appliance is not
in use, the gas must be turned CLOSED position
at the Liquid Propane Cylinder.
Check all gas supply fittings for leaks before
each use. Do not use the grill until all connections
have been checked and do not leak (see Leak Testing
instructions on page 18).
Fig. 21
Propane Cylinder
Regulator
Always keep the LP gas cylinder
at 90° (upright) orientation to
provide vapor withdraw.
Tank Bolt
Fig. 20
800
700
600
500
400
300
200
100

Related product manuals