2
SAFETY WARNINGS
• Safety Warnings and Precautions must be read and understood before
the instrument is used. They must be observed during use.
• The circuit under test
must be de-energized and isolated before
connections are made except for voltage measurement.
• Circuit connections
must not be touched during a test.
• After insulation tests, capacitive circuits
must be allowed to discharge
before disconnecting the test leads.
• The Live Circuit Warning and Automatic Discharge are additional safety
features and
should not be regarded as a substitute for normal safe
working practice.
• Replacement fuses
must be of the correct type and rating.
• Test leads, including crocodile clips, must be in good order, clean and
have no broken or cracked insulation.
• U.K. Safety Authorities recommend the use of fused test leads when
measuring voltage on high energy systems.
NOTE
THIS INSTRUMENT MUST ONLY BE USED BY SUITABLY TRAINED AND COMPETENT PERSONS.
To Next Page
Loading...
Need help?
General
