General Description
results to a Palmtop, Laptop or Personal
computer via an RS232 serial lead. The
optional miniature clip-on current transducer
MCC10 enables the instrument to measure
a.c. currents from 1 A to 10 A.
Instrument power is supplied by six 1,5 V
alkaline battery cells, which are constantly
monitored. When battery power is nearly
exhausted, the symbol appears on the
display. Remaining battery life can be
monitored at any time using the battery check
switch position. This is beneficial before going
on-site, to ensure enough battery power for the
day’s work.
Designed to IEC1010-1 the
BM80/2 Series
are protected against connection to a 440 V
Category
III supply. The instruments have a
basic accuracy of ± 2% at 20 °C.
The instruments are waterproof and dustproof
to IP54. This helps maintain accuracy and
ensures maximum reliability in harsh
environments.
5
To Next Page
Loading...
Need help?
General
