Need help?Do you have a question about the Megger DET4TCR2 and is the answer not in the manual?
General| Test Frequency | 128 Hz |
|---|---|
| Accuracy | ±2% ±3 digits |
| Continuity Test Current | 200 mA |
| Resolution | 0.01 Ω |
| Display | LCD |
| Data Storage | Yes |
| Data Transfer | USB |
| Power Source | Battery |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +60°C |
| IP Rating | IP54 |
| Safety Standards | IEC 61010-1 |
| Test Voltage | 50 V |
Essential safety warnings and precautions to be observed before and during instrument use.
Instructions for safely installing or replacing batteries in the instrument.
Specific procedure for charging rechargeable batteries in DET4TR2 and DET4TCR2 models.
How to interpret the battery charge level indicators on different models.
How fuse blown status is indicated on various DET models.
Details fuse specifications and safe replacement procedures.
Explains the ART method using a current transducer for in-situ measurements.
Explains the stakeless test method using VCLAMP and ICLAMP.
Procedure for calibrating the ICLAMP accessory for accurate measurements.
Detailed technical data, ranges, accuracy, environmental, and safety compliance.
To Next Page
