Need help?Do you have a question about the Megger DET4TD2 and is the answer not in the manual?
General| Accuracy | ±(2% + 2 digits) |
|---|---|
| Operating Temperature | -20 °C to +50 °C |
| IP Rating | IP54 |
| Storage Temperature | -20 °C to +60 °C |
| Power Source | 6 x 1.5 V AA batteries |
| Safety Rating | CAT IV |
| Measurement Range | 0.01 Ω to 2000 Ω |
| Test Current | 200 mA |
| Voltage Measurement Range | 0 to 600 V AC/DC |
| Display | LCD |
| Power Supply | 6 x 1.5 V AA batteries |
| Weight | 0.5 kg |
| Test Voltage | 250 V, 500 V, 1000 V |
Summarizes critical safety warnings and advice for using the instrument.
Specific warnings and precautions for situations involving live earth connections.
Explains the method for measuring resistance using two earth points.
Explains the 'fall of potential' test method for measuring earth electrode resistance.
Explains the ART method for measuring resistance without disconnecting the electrode.
Explains the stakeless test method using VCLAMP and ICLAMP for resistance measurement.
Explains the principle for measuring soil resistivity using four stakes.
Instrument connection diagrams for measuring ground noise voltage.
Instrument connection diagrams for two-terminal resistance tests.
Steps for performing a two-terminal resistance test on various models.
Instrument connection diagrams for three-terminal resistance tests.
Steps for performing a three-terminal resistance test on various models.
Connection diagram and steps for performing a three-terminal resistance test on DET3TA.
Instrument connection diagrams for three-terminal resistance measurement with lead null.
Instrument connection diagrams for four-terminal resistivity measurements.
Instrument connection diagrams for measuring ground current using ICLAMP.
Instrument connection diagrams for three-terminal resistance measurement using ART.
Instrument connection diagrams for ART lead null resistance measurement.
Instrument connection diagrams for two-clamp stakeless resistance measurement.
To Next Page
