Megger DET4TD2 User Manual

9
PREPARATIONS FOR USE
Batteries
The Megger DET series instruments are supplied with batteries fitted. When batteries become exhausted,
refer to the section on battery replacement or recharging.
Warning: Do not switch the instrument on with the battery cover removed.
Inspection
Before each use of the instrument, visually inspect the instrument case, test leads, stakes and connectors
to confirm that their condition is good, with no damaged or broken insulation.

Megger DET4TD2 Specifications

General

Accuracy	±(2% + 2 digits)
Operating Temperature	-20 °C to +50 °C
IP Rating	IP54
Storage Temperature	-20 °C to +60 °C
Power Source	6 x 1.5 V AA batteries
Safety Rating	CAT IV
Measurement Range	0.01 Ω to 2000 Ω
Test Current	200 mA
Voltage Measurement Range	0 to 600 V AC/DC
Display	LCD
Power Supply	6 x 1.5 V AA batteries
Weight	0.5 kg
Test Voltage	250 V, 500 V, 1000 V