M
AVTMMTO3xx Rev 3 Sept 2013
10
PC Interface Precautions
The MTO300 instrument was designed to operate as a peer to peer connection
between a Personal Computer with Windows OS and the Test Unit.
Unit is NOT designed for network operation. DO NOT Connect MTO300
to a network.
The TCPIP interface selected for MTO is in the limited connectivity AutoIP
address range. PC’s will take approximately 1 minute to auto-address the
MTO unit.
For proper unit functionality, the registry of the MTO300 interfaced network
adapter will be modified with a setting Tcpackfrequency = 1. This
modification improves the MTO communications speed by approximately a
factor of 10. If your corporation does not allow registry for a built in
Ethernet port, you have one of three options.
Use the USB to Ethernet adapter provided.
Order a MTO330 Interface Panel.
Order a MTO210 Interface Panel.
The internal server IP address is 168.254.1.1, Subnet Mask
255.255.0.0.
The MTO330 is a standard PC. For network operability it may need to be
registered with your IT department.
To Next Page
Loading...