Need help?Do you have a question about the Megger OTS 60AF/2 and is the answer not in the manual?
General| Type | Automatic Oil Test Set |
|---|---|
| Voltage Range | 0 - 60 kV |
| Display | LCD |
| Frequency | 50/60 Hz |
| Protection Class | IP54 |
| Test Standard | IEC 60156 |
| Electrodes | Spherical |
| Oil Temperature Measurement | Integrated temperature sensor |
| Printer | Yes, integrated |
| PC Interface | USB |
| Battery Type | Not applicable |
| Voltage Regulation | Automatic |
| Input Voltage | 100 - 240 V AC |
Details the steps for assembling and preparing the oil test vessel with electrodes and sample oil.
Instructions on how to correctly place the prepared test vessel into the test chamber.
Covers connecting the mains supply, setting the voltage selector, and powering on the test set.
Guides the user through selecting and initiating pre-programmed oil testing specifications.
Describes the procedure for performing a rapid assessment test on oil condition.
Details procedures for ASTM D877 and D1816 tests, including specific requirements.
Explains how to program custom test parameters for specific oil testing requirements.
To Next Page
