Using the Multi-Function Program Keys
Each (Blue) key has two functions. General operation and
Menu function.
General Operation Menu Function
Dispense coin A Enter / Confirm
Dispense Coin B Scroll Up
Dispense Coin C Exit
Dispense Coin D Scroll Down
There are two configuration modes available. Service Mode
and Set-up mode.
Service Mode: gives access to the most frequently used
product configuration options. (See Service Mode Options)
Set-up Mode: gives access to general product
configuration options that are required when setting up your
changegiver. (See Set-up Mode Options)
To access either mode or to view tube audit data the mode
key will need to be pressed as shown below.
Quick press to access Service Mode
Press & Hold for 2 seconds. to access Set-up Mode
Press twice to view tube audit data. Only
operates when tube cassette is fitted.
Parking dispenser arms. Only operates when
tube cassette is not fitted
SERVICE MODE OPTIONS
Press Press Description / Action Press
Float-up coin tubes / Insert coins
Clear credit accumulated – (Not MDB) &
Clear Clean Me Message
Float level reset
Float down coin tubes
Float teach / Insert coins
Inhibit a coin / Insert a coin
Reject
Lever
Enable a coin / Insert a coin
View coin details
View coin-set
Set Euro transition stage 1
Reject
Lever
Set Euro transition stage 2
Reject
Lever
Set Euro transition stage 3
Reject
Lever
Set Euro transition stage 4
Reject
Lever
Price Teach
Custom tube cassette teach
Predefined tube cassette teach
Reject
Lever
Predefined Euro cassette teach
Reject
Lever
THE LED HELP GUIDE
GREEN LED CODES
Mode
Button
Changegiver “MODE” button has been
pressed. Changegiver is now in service
mode.
Changegiver Set-up mode has been
activated.
AMBER LED CODES
The Amber LED helps you to diagnose changegiver
faults in the field.
The LED can flash between 0 and 4 times to indicate
a repairable fault to a specific changegiver module.
More information is given on a label, which is stuck
onto the separator solenoid bank.
Number of Flashes Module Requiring Service
Predefined Cassettes
Code A B C D
AA 1p 2p 5p 20p
AB 5p 10p 50p 20p
AC 5p 1p 2p 20p
AD 5p 20p 50p 10p
BA 5p 20p 20p 10p
BB 5p 20p 2p 1p
BC 10p 20p 50p £1
BD 1p 20p 2p 10p
AA 0,05 € 0,10 € 0,50 € 0,20 €
AB 0,01 € 0,05 € 0,50 € 0,10 €
AC 0,01 € 0,02 € 0,50 € 0,10 €
AD 0,05 € 0,10 € 0,50 € 0,10 €
BA 0,10 € 0,10 € 0,50 € 0,20 €
BB 0,05 € 0,10 € 0,20 € 0,10 €
BC 0,05 € 0,05 € 0,50 € 0,10 €
BD 0,01 € 0,05 € 0,02 € 0,10 €
CA 0,01 € 0,05 € 0,20 € 0,10 €
CB 0,10 € 0,20 € 0,50 € 1 €
Changegiver OK
Normal power up sequence / Reset
Coin Accepted
Coin Rejected (not recognised)
Coin Rejected (Inhibited by machine
/changegiver program settings)
• Discriminator
• Accept Gate
• Separator Top Level Sensors
• Tube Cassette Top Level Prisms
• Dispenser
Changegiver OK
Coin accepted / rejected
(Refer to Green LED Codes)
Program mode selected
(Refer to Green LED Codes)
Changegiver operation inhibited by VMC
Changegiver maintenance required
(Refer to Amber LED Codes)
Changegiver has no power or No power loom
connected. Is the power switched ON?
Faulty changegiver
(Take it out and return it for repair)
Quick Reference Card
Mode
Mode
Mode Mode
Mode Mode
Cycles
1 x Blink
2 x Blinks
3 x Blinks
Coin accepted
Slow Flash
Fast Flash
☺
☺
☺
☺
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
1.5s
Mode
Mode
Mode
Mode
Mode
Mode
Mode
Mode
To Next Page
Need help?
General
