Need help?Do you have a question about the MEI CF7000 and is the answer not in the manual?
General| Brand | MEI |
|---|---|
| Model | CF7000 |
| Category | Change Machines |
| Language | English |
Ensure the vending machine is upright and check the operating voltage matches the CF7000 label before mounting.
Mount the CF7000 by hanging it onto three studs after opening the discriminator assembly.
Verify reject lever operation, coin chute alignment, and lid function without power applied to the machine.
Connect necessary cables for communications or display, and secure any unused cables away from moving parts.
Overview of the keypad's LEDs, function buttons (A-E), LCD display, and their general purpose.
Details on blue key functions (dispensing, auto-dispense), the Mode button, and access to Service/Setup menus.
Introduction to filling coin tubes, with methods for manual filling or using Service Mode.
Step-by-step instructions for removing the cassette, inserting coins, and refitting it.
Procedure for inserting coins via the discriminator using the Service Mode for tube calibration.
Explanation of how to access Setup Mode menus, including passcode entry for CF7900 models.
Products operate at Safety Extra Low Voltage Level (SELV) and comply with standards for appliances and IT equipment.
The operating voltage is stated on the product label and must not be changed from the indicated source.
The CashFlow® 7000 Series must not be operated in the presence of flammable gasses, fumes or water.
Do not dispose of any part of a CashFlow® 7000 Series by incineration.
To Next Page