To Next Page
S
Sean ValenciaAug 7, 2025
How to reset factory settings parameter list on Meiko Dishwasher?
- MMr. Larry MartinezAug 7, 2025
To reset the Meiko Dishwasher parameters to the factory settings, switch the power supply on and off within 5 minutes.
How to reset factory settings parameter list on Meiko Dishwasher?
To reset the Meiko Dishwasher parameters to the factory settings, switch the power supply on and off within 5 minutes.
What to do when Meiko Dishwasher shows maintenance required?
When the set operating hours or batch number has been reached on your Meiko Dishwasher, inform the service department and perform maintenance. You can also reset the maintenance counter.
What to do if Meiko UPster U 500 Dishwasher says incorrect password / no authorization?
If the Meiko Dishwasher displays 'Incorrect password / no authorization,' try entering the code again.
What to do if Meiko UPster U 500 regeneration is necessary?
The user must start the regeneration of the Meiko Dishwasher. Make sure to empty the tank and add salt.
What to do if the door of Meiko Dishwasher is not closed?
If the door of your Meiko Dishwasher is not closed, check the S1 connection and change the microswitch. Also, check the microswitch adjustment and consider replacing a defective I/O circuit board.
Why is the emergency program active on my Meiko Dishwasher?
If the emergency program is active on your Meiko Dishwasher, and washing is restricted, check the system for boiler or tank heating issues and fresh water supply problems.
General| Basket dimensions | 500 x 500 mm |
|---|---|
| Cycle time | 90 / 120 / 240 s |
| Water consumption per cycle | 2.6 liters |
| Tank capacity | 11 liters |
| Tank heating | 2 kW |
| Boiler heating | 6.0 kW |
| Type | Undercounter Dishwasher |
Explanation of warning symbols used throughout the operating instructions for hazard identification.
Defines the approved use of the glass and dishwashing machine and prohibited uses.
Outlines the operator's responsibilities to ensure safe machine operation and maintenance.
General safety precautions for operating the warewashing machine, including electrical and hot water hazards.
Specific safety instructions for working on the machine's electrical components.
Instructions for safe transport, installation, and assembly of the machine.
Details on proper electrical connection, including voltage, grounding, and cable requirements.
Specifications for connecting the machine to the fresh water supply, including pressure and filtration.
Steps and safety precautions for initial commissioning by a service engineer.
General guidance and warnings before operating the washing machine.
Navigating and understanding parameters available at the service level for viewing and modification.
A comprehensive list of adjustable parameters, their ranges, settings, and notes.
Explanation of information codes displayed by the machine and troubleshooting steps.
List of error codes, their descriptions, and possible causes and remedies.
Essential safety precautions before and during maintenance or repair work.
Overview of maintenance tasks, recommended intervals, and procedures for different machine components.
