Meinberg Radio Clocks
Lange Wand 9
31812 Bad Pyrmont, Germany
Phone: +49 (5281) 9309-0
Fax: +49 (5281) 9309-30
http://www.meinberg.de
info@meinberg.de
LANTIME M200/GPS: Compact NTP Time Server with integrated GPS
Reference Clock
LANTIME M200 time servers can be installed to provide accurate time to small and medium sized computer
networks. This entry level time server synchronizes all systems either NTP- or SNTP-compatible utilizing a
built-in Meinberg GPS radio clock as its primary reference time source. A stable and precise oscillator is
capable of bridging interferences or a temporary loss of reception.
Important note
Produktgruppe
Key Features
- Synchronization of NTP and SNTP compatible clients
- Web based status and configuration interface
[1]
(Demo)
and console based graphical configuration
utility
- Supported networking protocols: IPv4, IPv6, HTTPS, HTTP, SSH, TELNET, SCP, SFTP, FTP,
SYSLOG, SNMP
- USB Port for installing firmware updates, locking frontpanel menu access and backup/restore of
configuration and log files
- Antenna connected with up to 300m of standard coaxial cable RG58
rev 2013.0704.1631 lantime-m200-gpsPage 1/4
To Next Page
Need help?
General
