To Next PageTo Next Page
Need help?Do you have a question about the MELAG Euroklav 23 S+ and is the answer not in the manual?
General| Type | Steam Sterilizer |
|---|---|
| Max Temperature | 134°C |
| Power Supply | 230 V |
| Weight | Approx. 45 kg |
| Power supply frequency | 50/60 Hz |
| Cycle Time | Varies depending on program |
| Sterilization temperature range | 121 °C - 134 °C |
| Sterilization programs | Universal, Quick, Gentle, Prion |
| Drying time | Varies depending on program |
| Dimensions (W x D x H) | 42.5 x 48.5 x 64 cm |
| Chamber Volume | 23 l |
| Power consumption | Approx. 2.5 kW |
Explains symbols on the device and in the manual.
Specifies requirements for operating personnel.
Instructions for device installation and initial setup safety.
Safety guidelines for the power cable and plug.
Instructions for proper decontamination and sterilization procedures.
Safe procedures for removing sterilized items.
Guidelines for safely moving and storing the device.
Guidance on handling device malfunctions.
Details the specific applications and limitations of the sterilizer.
Explains the fractionated flow procedure used for sterilization.
Discusses one-way and circulation feed water systems.
Details the internal monitoring and safety features.
Table comparing different sterilization programs.
A flowchart illustrating the main menu and program flow.
Explains how to navigate and use the setup menu options.
Lists standard and optional items included with the sterilizer.
Identifies key components of the front and rear panels.
Details the LC display and function keys.
General notes on setting up and installing the device.
Requirements and methods for supplying feed water.
Instructions for powering on the device.
Procedures for operating the sterilizer door.
How to set the device's date and time for documentation.
Importance of cleaning and disinfection before sterilization.
Guidelines for proper instrument decontamination.
Tips for correctly loading the chamber for optimal results.
Requirements for sterilization packaging materials.
Rules for sterilizing different types of loads together.
Guide to choosing the correct program for the load.
Table detailing program types, temperatures, and times.
How to use extra features like additional drying.
Steps to initiate a selected sterilization program.
Procedures for stopping a program before completion.
Safety precautions for handling sterilized items.
Guidelines for the proper storage of sterilized items.
Explains the importance and function of batch logging.
How to view daily and total batch counts.
Connecting a PC to the sterilizer for data transfer.
Steps to access and view log files on a computer.
Setting up automatic log output.
Procedure for printing specific log entries.
How to manually delete saved log data.
Explains log types, file endings, and log structure.
Describes built-in automated checks for device function.
Procedure for performing the Bowie & Dick steam penetration test.
How to check water conductivity via the display.
Table outlining maintenance tasks and their frequency.
General advice and warnings about cleaning procedures.
Instructions for checking and cleaning the internal water storage tank.
Step-by-step guide to replacing the door seal.
How to replace or sterilize the sterile filter.
Instructions for cleaning filters located inside the chamber.
Measures to take during different durations of operating pauses.
Steps for safely shutting down the sterilizer for long periods.
Explains the purpose of warnings and how to use them.
How malfunction messages are issued and their purpose.
Details specific warnings and their causes/solutions.
Lists common malfunctions, causes, and corrective actions.
Procedure for opening the door during a power failure.
Steps for changing tripped fuses in the device.
Lists key technical specifications like dimensions, weight, power.
Catalog of available accessories and replacement parts with article numbers.
Definitions of technical terms used in the manual.
Continues definitions of technical terms.
