Melitta 40791 - How to Use

6
How to Use
1
Fill the removable water reservoir with
desired amount of cold water and
replace securely on the back of unit.
NOTE: Ensure there are no grounds on the rim of the filter holder. This prevents a
proper seal from forming and may damage the machine.
Align raised dimple on the exterior of
espresso/pod filter holder with cutout
notch on inside of filter holder. Rotate
espresso/pod filter holder 180º to
secure in base.
2
3
Place ground espresso holder into
filter holder. Add one tablespoon of
ground espresso for each cup being
made. Use shallow holder for 1 cup
and deep holder for 2 cups. Press
grounds firmly into holder with
tamping tool and ensure no grounds
remain on the rim.
Place pod into filter holder. When using
an ESE (Easy Serving Espresso) pod,
always use the shallower espresso/pod
filter holder. Never put two pods in
either filter holder at one time.
3
OR
840193102 ENv02.qxd:840135000 Ev00.qxd 11/10/10 9:08 AM Page 6