28
6.10.2 Flag replacement parts
Spring GT7001 001
Flag GT9009 001
Clamp plate GT2007 001
Printed circuit board ZG0859
Armature clip
Several different makes of relay are used, which require different designs of armature
clip. When ordering a replacement relay, state that it is for use in a flag assembly
and it will be supplied with the correct armature clip.
The armature clip is marked by a number in the moulding to indicate which make of
relay it fits:
Make of relay Number on clip Reference number
PASI 1 GT 6008 001
HALLER 2 GT 6007 001
6.11 Replacements parts – ordering information
When ordering any spares, please quote the relay model number and serial number
as well as the printed circuit board part number.
Should the need arise for the equipment to be returned to ALSTHOM T&D Protection
& Control Ltd for repair, then the form at the back of this manual should be
completed and sent with the equipment together with a copy of any commissioning
test results.
To Next Page
Loading...
