To Next PageTo Next PageWhy doesn't coffee flow from my Melitta Coffee Maker?
If coffee does not flow from your Melitta Coffee Maker, it could be due to a few reasons. First, check if the water reservoir is filled and correctly inserted. If not, fill it and ensure it's properly seated. You may also need to open the milk shower until water runs out, then close it. Another potential cause is an obstructed brew unit, so try cleaning the brewing unit.
How to fix a Melitta LATTEA that only drips coffee?
If your Melitta Coffee Maker is dispensing coffee only drop-by-drop, it might be because the grinding level is too fine. Adjust the grinding level to a coarser setting. Also, try cleaning the brewing unit. If the problem persists, decalcify the machine and, if necessary, execute a cleaning program.
What to do if single/double cup buttons flash with the on/off button on Melitta LATTEA Coffee Maker?
If the single-cup and two-cup buttons are flashing alternately with the On/Off button on your Melitta Coffee Maker, it could be due to a missing or incorrectly inserted brewing unit. Make sure to insert the brewing unit properly. Another reason could be that the brewing chamber is overfilled. To resolve this, switch off the appliance and switch it on again via the On/Off button (repeat if necessary) until standby mode is displayed.
What to do if I can't re-insert the brew unit in my Melitta Coffee Maker?
If you're having trouble re-inserting the brew unit into your Melitta Coffee Maker, first check if the handle for the locking mechanism is correctly locked in place. If that's not the issue, the drive may not be in the correct position. To fix this, switch the appliance OFF and then ON again, then press the operating buttons for single-cup dispensing and two-cup dispensing simultaneously for more than 2 seconds. The drive will move into position. Replace the brew unit and check that it is correctly locked in place.
Why are the bean symbols flashing on my Melitta LATTEA when the container is full?
If the bean symbols are flashing on your Melitta Coffee Maker even though the bean container is full, it could indicate an insufficient quantity of ground beans in the brewing chamber. Try pressing the control button for single-cup dispensing or two-cup dispensing.
What to do if Melitta Coffee Maker grinder won't grind beans?
If the grinder in your Melitta Coffee Maker isn't grinding coffee beans, it could be that the beans are not dropping into the grinder, possibly because they are too oily. Try tapping lightly on the bean container to help them drop. If there are foreign objects in the grinder, contact the hotline.
What does it mean if the milk shower symbol is on out of sequence on my Melitta LATTEA?
If the symbol for the milk shower is illuminated out of sequence on your Melitta Coffee Maker, it indicates there is air in the lines inside the appliance. Open the milk shower until water runs out, and then re-close it. If necessary, clean the brewing unit.
Why is the grinder on my Melitta LATTEA Coffee Maker so loud?
If your Melitta Coffee Maker's grinder is making a loud noise, it could be due to foreign objects in the grinder. Contact the hotline.
General| Brand | Melitta |
|---|---|
| Model | LATTEA |
| Category | Coffee Maker |
| Language | English |
Explains the meaning of various symbols used throughout the manual.
Defines the proper and recommended applications for the appliance.
Describes uses that are not advised or may be unsafe.
Identifies and labels the parts of the appliance shown in a diagram.
Explains the symbols and indicators on the appliance's display panel.
Guidance on placing and positioning the appliance correctly.
Steps for safely connecting the appliance to a power source.
Instructions on how to add coffee beans to the machine.
Procedure for cleaning the milk container before first use.
Steps for adding water to the appliance's tank.
Process for powering on the appliance and preparing it for use.
How to control the volume of coffee brewed.
How to modify the intensity of the coffee.
Detailed steps for brewing a single serving.
Detailed steps for brewing a double serving.
Procedure for powering down the appliance.
Description of the appliance's different states (e.g., standby, ready).
How to set the water hardness level for optimal performance.
Configuration for automatic power saving.
Configuration for automatic shutdown.
How to set the desired coffee brewing temperature.
Procedure to restore default appliance configurations.
How to change the coarseness of the coffee grind.
Basic cleaning procedures for the appliance's exterior and accessible parts.
Specific instructions for cleaning the removable brewing component.
Instructions for running the automatic internal cleaning cycle.
Instructions for running the automatic descaling cycle.
How to safely move the appliance.
Environmentally responsible methods for discarding the appliance.
