EasyManua.ls Logo

Melitta LATTEA - Adjusting the amount of coffee that will be dispensed; Adjusting the brewing strength

Melitta LATTEA
268 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52
When water is no longer outlet and the symbol for the milk shower is
illuminated, turn the rotary switch for the milk shower anticlockwise to
close the milk shower.
The appliance is ready for operation.
Adjusting the amount of coffee that will be dispensed
Turn the coffee quantity regulator (Fig. A, no. 4) to variably adjust the
dispensing quantity (regulator to the left: less coffee, regulator to the right:
more coffee).
Coffee quantity
Regulator far
left
Regulator in
the middle
Regulator far
right
for single-cup
dispensing
30 ml 125 ml 220 ml
for two-cup
dispensing
2 x 30 ml 2 x 125 ml 2 x 220 ml
Adjusting the brewing strength
Press the button for brewing strength several times to select from
among three possible degrees of brewing strength.
Your selection is indicated by the bean symbols in the display.
Display Brewing strength
mild
normal
(factory setting)
strong
You can also change the coffee avour via the neness level of the grin-
der. See page 64 for more information in this regard.
Heft_Lattea_EU.indd 52 09.07.2009 15:28:56

Table of Contents

Related product manuals