What to do if coffee does not flow from my Melitta CAFFEO LATTEA E 955-101 Coffee Maker?
If coffee does not flow, there might be a few reasons. First, ensure the water tank is filled correctly and properly inserted. If this doesn't work, try opening the milk shower until water flows out, then close it. Another possibility is that the brewing unit is obstructed, so try cleaning it.
Why is my Melitta CAFFEO LATTEA E 955-101 only dripping coffee?
If your coffee is only dripping through, the grinding fineness might be too fine. Try setting the grinding fineness coarser. Also, clean the brewing unit. If the issue persists, run the integrated descaling or cleaning program.
What to do if I interrupted the cleaning or descaling process on my Melitta Coffee Maker?
If the cleaning or descaling process was interrupted, possibly due to a power outage, the appliance will autonomously perform a rinsing program. Follow the appliance instructions to complete this process.
What does it mean when all the buttons are flashing on my Melitta CAFFEO LATTEA E 955-101?
If all the buttons on your Melitta Coffee Maker are flashing continuously, this indicates a system error. Try switching the appliance off and then on again using the ON/OFF button.
Why won't the grinder grind coffee beans in my Melitta CAFFEO LATTEA E 955-101?
If the grinder isn't grinding, the beans might not be dropping into the grinder, possibly because they're too oily. Try tapping lightly on the bean container. If the problem continues, there might be foreign objects in the grinder, in which case you should call the hotline.
What to do if the symbols for cleaning and stand-by flash alternately on Melitta CAFFEO LATTEA E 955-101 Coffee Maker?
If the cleaning and stand-by symbols are flashing alternately, the brewing unit might be missing or not properly inserted. Ensure it's correctly inserted. Alternatively, the brewing chamber could be overfilled. Try switching the appliance off and on again using the ON/OFF button until standby mode is displayed.
What to do if the brewing unit can no longer be reinserted in my Melitta Coffee Maker?
If you can't reinsert the brewing unit, first check if the handle for locking the brewing unit is correctly engaged. If not, ensure it is. If that doesn't work, the actuator might not be in the proper position. Switch the appliance off and on again, then simultaneously press the one- and two-cup dispensing buttons for more than 2 seconds to move the actuator into position. Then, reinsert the brewing unit and lock it in place.
Why is the grinder on my Melitta CAFFEO LATTEA E 955-101 so loud?
If your grinder is making a loud noise, there might be foreign objects inside. If this is the case, you should call the hotline.
Why do the bean symbols flash on my Melitta CAFFEO LATTEA E 955-101 Coffee Maker when the container is full?
If the bean symbols are flashing even when the bean container is full, there might be an insufficient quantity of ground beans in the brewing chamber. Press the button for one-cup dispensing or two-cup dispensing.
Why is the milk shower symbol illuminated out of sequence on my Melitta CAFFEO LATTEA E 955-101?
If the symbol for the milk shower is illuminated out of sequence, there might be air in the lines inside the appliance. Open the valve until the symbol goes out, then close it again. Switch off the appliance, remove the brewing unit, clean it under running water, and reinsert it. Switch the appliance back on and dispense a larger amount of coffee.
General| Model | CAFFEO LATTEA E 955-101 |
|---|---|
| Color | Black |
| Milk Container Capacity | 0.5 L |
| Power Consumption | 1400 W |
| Pump Pressure | 15 bar |
| Programmable | Yes |
| Automatic Shut-off | Yes |
| Connectivity | No |
| Display | LED |
| Coffee Types | Espresso, Coffee, Cappuccino, Latte Macchiato |
| Used Coffee Container Capacity | 10 servings |
To Next Page