100
• Press the ON/OFF button to conrm the selected time.
→ All symbols in the display ash briey as conrmation. The appli-
ance is ready for operation, the standby symbol is illuminated.
10.4 Brewing temperature
The brewing temperature is factory-set at level 2 (medium ).
Prerequisite: The appliance must be ready for operation (see
89 „Switching on and o“ ).
Adjust the brewing temperature as follows to meet your requirements:
• Simultaneously press the button for one-cup dispensing and
the button for two-cup dispensing for more than 2 seconds.
→ The standby symbol is ashing.
• Press the button for one-cup dispensing four times to call the
menu for brewing temperature.
→ The symbol for cleaning ashes.
• Press the button for coee strength to select between the
three possible brewing temperatures.
Display Brewing tempe-
rature
low
medium
(factory setting)
high
• Press the ON/OFF button to conrm the selected brewing
temperature.
Heft_Lattea_Fernost_2_3.indd 100 12.05.2014 15:15:42