102
10.6 Grinding neness
The grinding neness level was optimally adjusted prior to delivery. Con-
sequently, we recommend that you only readjust grinding neness after
dispensing approximately 1,000 coees (about 1 year).
You can only set the grinding neness while the mill is running. Thus,
adjust grinding neness directly after coee dispensing starts.
If the coee avour is not suciently intense, then we recommend that you
set a ner grinding level.
• Reach into the recess on the right side of the appliance (Fig. A,
no. 14) and pull o the cover to the right.
• Start a normal coee dispensing process.
• While the grinder is running: Place the lever in one of the three
positions (Fig. E).
• Insert the four catches of the cover into the back of the appliance
and swing the cover to the left until it locks into place.
Lever position Grinding neness
Left Fine
Centre Medium
Right Coarse
(factory setting)
Heft_Lattea_Fernost_2_3.indd 102 12.05.2014 15:15:42
To Next Page
Loading...
