104
11.2 Cleaning the brewing unit
Prerequisite: The appliance must be switched o (see 89
„Switching on and o“ ).
Note
For optimal protection of your appliance, we recommend that you
clean the brewing unit under running tap water once a week.
• Reach into the recess on the right side of the appliance (Fig. A,
no. 14) and pull o the cover to the right.
• Press and hold the red button on the handle of the brewing unit
(Fig. B, no. 1) and turn the handle clockwise to the stop (approxi-
mately 75°).
• Use the handle to pull the brewing unit out of the appliance.
• Leave the brewing unit as it is (do not move or twist the compon-
ents of the brewing unit).
• Thoroughly rinse o the entire brewing unit from all sides under
running water. Make sure particularly that the surface shown in
Fig. D is free of coee residues.
Caution!
Never clean the brewing unit in the dishwasher.
• Let the brewing unit drip dry.
• If necessary, remove coee residues from the surfaces in the
interior of the appliance where the brewing unit is inserted.
• Reinsert the brewing unit into the appliance and turn the handle
of the brewing unit anti-clockwise to the stop to lock.
• Insert the four catches of the cover into the back of the appliance
and swing the cover to the left until it locks into place.
Heft_Lattea_Fernost_2_3.indd 104 12.05.2014 15:15:42
To Next Page
Loading...
