85
Notes
– Keep the packaging material, including hard foam elements,
in order to avoid damage during transport or in case of return
shipments.
– It is normal to nd traces of coee and water in the machine
before it is started up for the rst time. This is because the
appliance has already been tested for faultless function at the
factory.
4.2 Connecting
• Plug the power cable into an appropriate power socket.
Warning!
Danger of re and electric shock due to incorrect
supply voltage, incorrect or damaged connections and
power cord.
– Make sure that the supply voltage corresponds to the supply
voltage specied on the identication label of the appliance.
The identication label is on the right side of the appliance be-
hind the cover (Fig. B, no. 14).
– Make sure that the power socket meets the applicable stan-
dards for electrical safety. If in doubt, contact a qualied elec-
trician.
– Never use damaged power cables (damaged insulation, bare
wires).
Heft_Lattea_Fernost_2_3.indd 85 12.05.2014 15:15:41
To Next Page
Loading...
