Melitta LATTEA - Resetting to factory settings

64
Display Brewing temperature
low
medium
(factory setting)
high
Press the On / Off button to conrm the selected brewing tempera-
ture.
All symbols in the display ash briey for conrmation. The appliance is
ready for operation, the standby symbol is illuminated.
Resetting to factory settings
To reset the device to the factory settings, execute the following points:
Prerequisite: The appliance is ready for operation, the standby symbol
is illuminated.
Simultaneously press the button for brewing strength and the
On / Off button for more than two seconds.
All settings will be reset to the factory settings. The standby symbol will
ash briey for conrmation.
Overview of factory settings:
Function settings Factory setting
Water hardness Water hardness 4
Energy-saving
standby mode
Level 1 (15 minutes)
Auto-off function Level 1 (1 hour)
Brewing temperature Level 2 (medium)
•
→
•
→
Heft_Lattea_EU.indd 64 09.07.2009 15:29:07