Adjusting grinding neness
The grinding neness level was optimally adjusted prior to delivery. Consequently, we
recommend that you only readjust grinding neness after approximately 1,000 coffee
preparation processes (approximately 1 year).
You can only set the grinding neness while the grinder is running. Thus, adjust grin-
ding neness directly after coffee dispensing starts.
If the coffee avour is not sufciently intense then we recommend that you set a ner
grinding level.
Reach into the recess on the right side of the appliance (Fig. A, no. 14) and
pull off the cover to the right.
Start a normal coffee dispensing process.
While the grinder is running: Place the lever in one of the three posi-
tions (Fig. E).
Insert the four catches of the cover in the back of the appliance and swing
the cover to the left until it engages.
Lever position Grinding neness
left ner
centre medium
right coarser
•
•
•
•
To Next Page
Loading...
