Memmert ULM 600 - Page 5

set
0I
power
fresh air
0
1
2
3
4
5
6
alarm se t
°C
UM 200-800/SM 200-400, ULM/SLM 400-800
4
model volume current consum. power
voltage ±10%
weight
UM/SM 200 32 l 4,78 A 1100 W 230 V~ 28 kg
UM/SM 300 39 l 5,22 A 1200 W 230 V~ 30 kg
UM/SM/ULM/SLM 400 53 l 6,09A 1400 W 230 V~ 35 kg
UM/ULM/SLM 500 108 l 8,70 A 2000 W 230 V~ 50 kg
UM/ULM/SLM 600 256 l 10,43 A 2400 W 230 V~ 87 kg
UM/ULM/SLM 700 416 l 5,80 A 4000 W 400 V 3N~ 121 kg
UM/ULM/SLM 800 749 l 6,96 A 4800 W 400 V 3N~ 164 kg
This equipment is intended for operation on a supply system with a system impedance
Z
max
at the transfer point (building connection) which does not exceed 0.12 Ohm. The user
has to ensure that the equipment is being operated on a supply system which meets this
requirement. If necessary, details of the system impedance can be obtained from the local
power supply authority.
Quality of material
Memmert is using stainless steel (Spec. 1.4301) for the external casing as well as
for the interior, an outstanding material because of its high stability, optimum
hygienic features and corrosion resistance against many (not all!) chemical
combinations (Attention e.g. at chlorine combinations!).
WARNING!
Before removing top cover – pull out plug !