EasyManua.ls Logo

Memmert UM 500 - User Manual

Memmert UM 500
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATING INSTRUCTIONS
UM 200 - 800
SM 200 - 400
ULM/SLM 400 - 800
OPERATING INSTRUCTIONS
Drying ovens
UM 200 - 800
ULM 400 – 800
Sterilisers
SM 200 - 400
SLM 400 – 800
Question and Answer IconNeed help?

Do you have a question about the Memmert UM 500 and is the answer not in the manual?

Summary

Welcome and Safety Information

General Safety Instructions

Covers physical and chemical properties of load, explosion risk, dust, and aggressive vapors.

Technical Data and Electrical Supply

Electrical Supply Details

Outlines electrical supply requirements, fuse rating, and connection precautions.

Operation Setup and Door Handling

Initial Putting into Operation

Advises on checking temperature sensors and initial supervised operation until steady conditions are met.

Main Switch and Fresh Air Control

Controller and Timer Operation

Timer Operation for UM;ULM Ovens

Details how to use the timer for timed operation, including setting time periods and installation by a service engineer.

Safety Devices

Adjustable Overheat Controller (TWW)

Details how to set and use the TWW for protection, including setting limits and checking the alarm.

Adjustable Temperature Limiter (TWB)

Explains how to set and use the TWB for protection, including resetting the limiter.

Steriliser Operation and Directives

Sterilisation Directives and Preparation

Provides directives for hot air sterilization, including material preparation and recommended temperatures.

Loading Recommendations

Maintenance and Adjustment

Temperature Controller Recalibration

Details the steps for recalibrating the temperature controller, including turning the adjusting disk and checking the display.

Door Readjustment Procedure

Explains how to readjust the door using screws, eccentrics, and locking plates for proper closing.

Summary

Welcome and Safety Information

General Safety Instructions

Covers physical and chemical properties of load, explosion risk, dust, and aggressive vapors.

Technical Data and Electrical Supply

Electrical Supply Details

Outlines electrical supply requirements, fuse rating, and connection precautions.

Operation Setup and Door Handling

Initial Putting into Operation

Advises on checking temperature sensors and initial supervised operation until steady conditions are met.

Main Switch and Fresh Air Control

Controller and Timer Operation

Timer Operation for UM;ULM Ovens

Details how to use the timer for timed operation, including setting time periods and installation by a service engineer.

Safety Devices

Adjustable Overheat Controller (TWW)

Details how to set and use the TWW for protection, including setting limits and checking the alarm.

Adjustable Temperature Limiter (TWB)

Explains how to set and use the TWB for protection, including resetting the limiter.

Steriliser Operation and Directives

Sterilisation Directives and Preparation

Provides directives for hot air sterilization, including material preparation and recommended temperatures.

Loading Recommendations

Maintenance and Adjustment

Temperature Controller Recalibration

Details the steps for recalibrating the temperature controller, including turning the adjusting disk and checking the display.

Door Readjustment Procedure

Explains how to readjust the door using screws, eccentrics, and locking plates for proper closing.

Memmert UM 500 Specifications

General IconGeneral
TypeUniversal Oven
Frequency50/60 Hz
ControlDigital
Heating TypeAir Circulation
Voltage230 V

Related product manuals