9
OPERATION (CONTINUED)
Set the current hour by pressing
the Skip/Search m 1 or l 2
button. Then, press the TIME SET
button 3; the minutes will blink.
Make sure to select the correct
AM or PM setting.
3
With the power off, press and hold
the TIME SET button; 12 hour
or 24 hour mode will blink in the
display.
1
Select 12 hour or 24 hour mode by
pressing the Skip/Search m 1 or
l 2 button. Then, press the TIME
SET button 3; the hour will blink.
2
TO SET OR RESET THE TIME
Set the current minute by pressing
the Skip/Search m 1 or l 2
button. Then, press the TIME SET
button 3 to nish. The minutes
will stop blinking and the clock
will be set.