7
INSERTING AN iPod
Insert the Universal Dock
included with your iPod (A) into
the iPod compartment (B) (as
shown), making sure the tabs
are facing front, and slip the
tabs into place. Press the rear
side of the Universal Dock until
it is positioned inside the iPod
compartment.
1
The iPod will charge as long as
this unit is connected with the AC
adapter.
Please see the next page for
instructions on using an iPod with
this unit.
3
Slide the iPod (A) into the
Universal Dock (B) (as shown).
Gently push down so the
connector on the iPod slides onto
the connector on this unit.
2
NOTES:
• When the iPod is connected to
this unit, it will be in the Pause
mode.
• To remove the Universal Dock,
insert your nger (or other
object) into the gap in the
Universal Dock, then gently
pull the Universal Dock out to
remove it.
• CHARGING: When the iPod is
inserted into the dock, whether
this unit is on or off, the iPod’s
battery will charge until it is full.
To Next Page
Loading...
Need help?
General
