Memorex XBoom - User Manual

To Next Page

XBoom

User’s Manual











1* Memorex Xboom

1* Charging cable

1* User manual

Thank you for choosing the XBoom as your source for entertainment! This speaker

can be used via a Bluetooth connection with a tablet, some computers and some

smartphones to stream music and make wireless telephone calls.

To make the most of the features of your speaker, we recommend that you carefully

read this user guide first.

XBoom

is waterproof, which means the speaker can be heavily splashed with water

or left in the rain. If the speaker gets wet, it is recommended that you dry the speaker

completely before using it again.

Please note: please make sure that cover is closed and secure before using in a wet

environment.

When using your Memorex Xboom, basic safety precautions should always be followed,

including the following:

1. Keep this product and its charging cable away from excessive heat.

2. Do not operate this device with a damaged cable or after it has malfunctioned or

has been damaged in any manner.

3. Do not disassemble your device.

1. Use the USB-C power cord in the accessories to connect the DC 5V charger / USB

port on your computer / notebook/ power bank and speaker for charging.

2. The red indicator will turn on to indicate that the unit is charging and then will turn off

when fully charged.

Tips: There will be a beep when battery low and needs to be recharged.

To maintain the battery's durability, fully charge the speaker if it is not used for a

long time.



1. Play / Pause / Hands-free Button

Press the “ ” when music is playing to pause the music.

Press the “ ” when music is paused to begin playing again.

Press the “ ” to answer / reject the phone call.

2. Power / Light Button

Press and hold the “ ” to power on/ off

Presse the “ ” to change the various lightshow modes

when Xboom on.

3. TWS / EQ Button

Short press the “ ” to achieve the TWS paired or TWS

cleared.

Press and hold the “ ” to switch EQ modes

(Indoor or Outdoor)

4. Next track / Vol + Button

To skip to the next track, press and hlod the“ ”Button. To

increase the volume, press the“ ”Button.

5. Previous track / Vol - Button

To go back the previous track, press and hold the “ ”

Button.

To lower the volume, press the“ ” Button.

6. Mic

7. Indicator

8. Type-C Charging port (DC 5V/1A)

1 2

4 5

Need help?

Do you have a question about the Memorex XBoom and is the answer not in the manual?

Summary

Pairing Bluetooth Devices

Bluetooth Pairing Procedure

Step-by-step guide to connect your audio device via Bluetooth.

Hands-Free Functionality

Call Handling with Speaker

Instructions for answering, rejecting, and ending calls using the speaker.

TWS (True Wireless Stereo) Function

TWS Stereo Pairing Setup

Guide to wirelessly connect two XBoom speakers for stereo sound.

Troubleshooting Common Issues

Speaker Not Connecting to Device

Solutions for Bluetooth pairing or connection failures.

Limited Bluetooth Connection Range

Summary

Pairing Bluetooth Devices

Bluetooth Pairing Procedure

Step-by-step guide to connect your audio device via Bluetooth.

Hands-Free Functionality

Call Handling with Speaker

Instructions for answering, rejecting, and ending calls using the speaker.

TWS (True Wireless Stereo) Function

TWS Stereo Pairing Setup

Guide to wirelessly connect two XBoom speakers for stereo sound.

Troubleshooting Common Issues

Speaker Not Connecting to Device

Solutions for Bluetooth pairing or connection failures.

Limited Bluetooth Connection Range

The Memorex XBoom is a portable Bluetooth speaker designed for entertainment, offering a range of features for music streaming and hands-free calling. Its robust design includes waterproof capabilities, making it suitable for various environments, including outdoor use where it might be exposed to splashes or rain.

Function Description:

The primary function of the XBoom is to provide high-quality audio playback via Bluetooth connectivity. It can pair with a variety of Bluetooth-enabled devices such as tablets, computers, and smartphones, allowing users to stream music wirelessly. Beyond music, the speaker also supports hands-free telephone calls when connected to a smartphone, enhancing its utility for communication.

Usage Features:

Bluetooth Connectivity: The speaker is designed for easy pairing with Bluetooth audio sources. To initiate pairing, users power on the speaker, which enters a pairing status indicated by a blinking blue LED. Once "XBoom" is selected from the device's Bluetooth list, the connection is established, and the LED turns solid blue. The speaker can also be disconnected from a Bluetooth device by pressing and holding a dedicated button. If no Bluetooth device is available, the speaker will automatically power off after 10 minutes. If connected but inactive, it will power off after 30 minutes to conserve battery.
Hands-Free Calling: When paired with a smartphone, the XBoom allows users to answer, reject, and end phone calls directly from the speaker. Dedicated buttons facilitate these actions, providing convenience during calls.
TWS (True Wireless Stereo) Function: For an enhanced audio experience, two XBoom speakers can be linked together to create a wireless stereo system. This TWS function allows both speakers to play music simultaneously, providing a more immersive sound. To activate TWS, users power on both speakers (ensuring no existing Bluetooth connection), then press a specific button on one speaker to initiate the TWS connection. Once connected, both units will show a solid blue LED. The TWS connection can be disconnected by a short press of the same button on one of the speakers.
EQ Modes: The speaker includes EQ (Equalizer) modes, allowing users to switch between different sound profiles, such as "Indoor" or "Outdoor," by pressing and holding a dedicated button. This feature helps optimize the audio output for various listening environments.
Playback Controls: The XBoom features intuitive controls for music playback. Users can play/pause music, skip to the next or previous track, and adjust the volume using dedicated buttons.
Lightshow Modes: The speaker incorporates various lightshow modes, which can be changed by pressing the power button when the XBoom is on. This adds a visual element to the audio experience.

Maintenance Features:

Waterproof Design: The XBoom is waterproof, meaning it can withstand heavy splashes of water or exposure to rain. This feature makes it durable for outdoor use. However, it is recommended to dry the speaker completely after it gets wet before using it again. It is crucial to ensure that the charging port cover is closed and secure in wet environments to maintain its waterproof integrity.
Battery Management: The speaker provides a low battery warning (a beep) when it needs recharging. To maintain the battery's durability and longevity, it is advised to fully charge the speaker if it is not going to be used for an extended period.
Charging: The XBoom is charged using a USB-C power cord, which connects to a DC 5V charger, USB port on a computer/notebook, or a power bank. A red indicator light turns on during charging and turns off when the unit is fully charged.
Troubleshooting Support: The manual provides a troubleshooting guide for common issues such as connection problems, low battery, charging difficulties, and Bluetooth range limitations. For persistent issues, users are directed to contact Memorex support via email or a toll-free number.

Safety Precautions:

The manual emphasizes important safety precautions, including keeping the product and its charging cable away from excessive heat, not operating a damaged device or cable, and refraining from disassembling the device. These guidelines are crucial for ensuring the safe and proper functioning of the XBoom.