8
During CD playback, if you wish to
pause the disc momentarily, press
the PLAY/PAUSE ( )/ MEM-UP
button. Playback stops but the
disc continues to spin and the
track number blinks in the display.
1
Press the PLAY/PAUSE ( )/
MEM-UP button again to release
pause and resume normal CD
playback. The sound returns and
the track number stops blinking.
2
After you insert the disc into the
CD player and the total number of
tracks and playing time appear on
the display, you may press the
TUNING/Skip/Search Up ❶ or
Down ❷ button to select a specific
track for playback.
1
When the desired track number
appears in the display, press the
PLAY/PAUSE ( )/ MEM-UP
button. Playback will begin on the
track you selected.
2
CD PAUSE CONTROL
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
During playback, press and hold
either the TUNING/Skip/Search
Up or Down button to move the
player forward or backward within
a track to locate a specific
musical passage. The player will
move forward or backward at high
speed as long as the buttons are
depressed. When you release the
TUNING/Skip/Search Up or Down
button, normal playback will
resume.
During playback, press the
TUNING/Skip/Search Up button
once to advance the player to the
beginning of the next track. Press
the TUNING/Skip/Search Up
button repeatedly to advance the
player to higher numbered tracks.
1 3
During playback, press the
TUNING/Skip/Search Down button
once to move the player back to the
beginning of the playing track. Press
the TUNING/Skip/Search Down
button repeatedly to move the player
back to lower numbered tracks.
2
FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH
To Next Page
Loading...
