– 26 –
SETTING LOADING
Go to menu display item no. 8 of
SETTING OPTION RATING.
1
Press the + or - button until ON
appears beside LOADING then press
the MENU button.
3
Press the MENU button to exit.
4
V-BLOCK SET
MPAA RATING PG-13
TV RATING TV-PG-DLSV
OPTION RATING ON
LOADING OFF
EXIT
[+] / [-] : SELECT
[MENU] : ENTER
Press the MENU button. The OFF (or
ON) to the right of LOADING will flash.
2
V-BLOCK SET
MPAA RATING PG-13
TV RATING TV-PG-DLSV
OPTION RATING ON
LOADING OFF
EXIT
[+] / [-] : ON/OFF
[MENU] : ENTER
If there is error in loading, the "PRCC LOADING" message will change
color from red to white and data will not load.
Until loading is completed, if loading is interrupted by a channel change then
data will not load .
When TV set received new "PRCC LOADING" data it will overwrite the current
option rating stored in the memory and all ratings set to "OFF".
PRCC LOADING
If you don't want to load any OPTION RATING, set LOADING to OFF.
With LOADING set to ON, if there is Option Rating signal being decoded, a "PRCC
LOADING " message appears in red on TV screen as shown below.
NOTES
To Next Page
Loading...
