9
Pairing a Bluetooth Device for the First Time
1. When first powered on the sound bar defaults to Bluetooth mode. A voice will say, "Bluetooth", and the LED
indicator will slowly flash blue. When pairing, remain within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth device, select MTB061 in the Bluetooth Settings to pair. If need be, refer to
the user's manual for your specific device for more information.
3. When successfully paired, a voice will announce, "Bluetooth is connected", and the LED indicator will turn solid
blue. Audio from the connected Bluetooth device will now be heard through the speaker.
4. Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the
connected Bluetooth device to play, pause, and adjust the volume level.
5. After initial pairing, whenever the sound bar is powered on, the sound bar will automatically connect to the last
Bluetooth device used. Note: If your device should become unpaired or you find it is unable to connect, press
& hold the Pair button on remote or press the Pair button on the soundbar to enter pairing mode. A voice will
announce, "Bluetooth is connecting", and you can connect to the speaker manually.
Playing Audio Wirelessly
1. After pairing to a Bluetooth device, use the controls on the connected Bluetooth Device to select a track.
2. Play, pause or skip a selected track using the controls on the connected Bluetooth Device or the
soundbar's remote.
3. Audio played through the connected Bluetooth device will now be heard through the speakers.
Bluetooth Wireless
To Next Page
Loading...
Need help?
General
