ENGLISH
33
Push the center of the tape until it is automatically retracted into the TV/VCR.
AUTOMATIC POWER ON AND PLAY
When loading a cassette tape without the erase prevention tab intact, the TV/VCR will turn on automatically
and playback will start immediately.
Insert the cassette with its labeled side facing you.
An inverted video cassette cannot be inserted.
LOADING AND UNLOADING A VIDEO CASSETTE
UNLOADING
Pull the cassette out.
1
LOADING
Use only video cassette tapes marked .
To unload a video cassette, press the EJECT
button on the remote control, or press the Stop/
Eject button on the TV/VCR twice. The first
press will stop the tape in any mode. The second
press will eject the tape.
AUTOMATIC EJECT
If the TV/VCR automatically rewinds the tape to the
beginning (AUTO REWIND FEATURE), the tape will
be ejected automatically. (See NOTE on page 40.)
NOTES:
• Always eject the tape when not in use.
• The cassette tape can be ejected even if the POWER is “OFF”.
2
1
To Next Page
Loading...
Need help?
General