Memorex MX7300 - CD Pause Control; To Begin Playback from a Specific Track; Forward;Reverse Skip Track and High-Speed Music Search

11
While in the stop mode, press
either the Tune/Skip/ Search n 1
or o 2 button to select a specific
track for playback.
1
2
1
Press the PLAY/PAUSE (®p)
button. Playback will begin on the
track you selected.
2
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
During playback, depress and
hold either the Tune/Skip/Search
n or o button to move the player
forward or backward within a
track to locate a specific musical
passage. The player will move
forward or backward at high
speed as long as the button is
depressed. When you release the
Tune/Skip/Search n or o button,
normal playback will resume.
During playback, press the
Tune/Skip/Search
n button once
to advance the player to the
beginning of the next track. Press
the Tune/Skip/Search n button
repeatedly to advance the player
to higher numbered tracks.
1 3
During playback, press the
Tune/Skip/Search o button once to
move the player back to the
beginning of the current track. Press
the Tune/Skip/Search o button
repeatedly to move the player back
to lower numbered tracks.
2
FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH ( / )
OPERATING INSTRUCTIONS (CONTINUED)
You can also use the Direct Track
Selection buttons 1 on the
remote to directly select a track. If
the track is over 9, press the ≥10
button 2 first. Playback will start
automatically.
13
2
46
5
79
8
0
2
1
3
During CD playback, if you wish to
pause the disc momentarily, press
the PLAY/PAUSE (
®p) button.
Playback stops but the disc
continues to spin and the elapsed
time will blink in the display.
1
Press the PLAY/PAUSE (®p)
button again to release pause and
resume normal CD playback.
2
CD PAUSE CONTROL