Need help?Do you have a question about the Memphis SRX750D.1 and is the answer not in the manual?
Troubleshoot amplifier no output by checking wiring, voltage, and signal source.
Address weak amplifier output by checking input sensitivity and subsonic filter settings.
Diagnose and resolve unwanted noise issues by checking grounding, ignition, and wire routing.
Details the 12V+ connection directly at the positive battery post, including wire size and fuse.
Instructions for making a proper ground connection directly to the vehicle chassis.
Connects the remote turn-on lead to the source unit's remote turn-on or power antenna output.
Adjusts the signal required to drive the amplifier to full output, not a volume control.
Removes high frequencies, adjustable from 30Hz to 250Hz with a 12dB per octave slope.
Switchable boost levels (0dB, +6dB, +12dB) for bass enhancement, use with discretion.
Allows remote adjustment of amplifier input level from the listening position via RJ45 jack.
Filters unwanted subsonic bass frequencies below audible range, variable from 15Hz to 50Hz.
Details items excluded from warranty, including improper installation, misuse, and freight damage.
To Next Page
General
