2
IMPORTANT SAFETY INSTRUCTIONS
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Avoid dangerous environments. Do not operate power tools in explosive
atmospheres, such as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
d) Keep the tool pointed away from yourself and others at all times and keep hands,
any body parts away from work area to guard against possible injury.
e) Use safety equipment. Always wear eye protection and ear protection. Safety
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing
protection should be used for appropriate conditions.
f) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with grounded power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
g) Do not keep the trigger or safety depressed during the loading of fasteners as the
unintentional firing of a fastener could cause personal injury.
h) Disconnect the tool from the power source before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
i) Do not fire if the nails/staples are jammed. This will cause damage to the driver
blade and could invite accidents.
j) DO NOT use on hard surface such as rock, concrete, masonry, bricks or steel.
Personal injury or damage to the power tool could result.
k) Do not drive fasteners close to the edge of the work piece.
l) Do not drive fasteners on top of nailed fastener.
m) Only use parts and accessories recommended by manufacturer.
WARNING When using electric tools, machines or equipment, basic safety
precautions should always be followed to reduce the risk of
e, electric shock,
and personal injury.
READ
ALL
INSTRUCTIONS BEFORE USING THIS TOOL
To Next Page
Loading...