Page 16
PROBLEM POSSIBLE CAUSE SOLUTION
The Boost LED shuts off. The Boost mode is
completed.
This is normal. The charger
will automatically switch
to charging mode to fully
charge the battery. Or
you may press the Rate
Selection button and
select either the 6A<>2A
CHARGE/MAINTAIN rate or
ENGINE START.
15. SPECIFICATIONS
Input Voltage ........................................................ 120V AC
@
60Hz, 12.7A cont., 49A int
Output Voltage ............................................................................................. 6V or 12V DC
Output Current Rating .......6V/12V@2A cont., 6/60A int.; 6V@125A int.; 12V@275A int.
To Next Page
Loading...