Why is there abnormal noise when riding my Merach MR-S02 with maximum resistance?
If you experience abnormal noise when riding your Merach Exercise Bike with maximum resistance, it's likely due to the brake block contacting the wheel. To resolve this, turn the resistance knob one or two turns counterclockwise. Also, it is not recommended using the bike at maximum resistance for extended periods.
How to adjust the gear on a Merach Exercise Bike?
To adjust the gear on your Merach Exercise Bike, turn the knob clockwise to increase resistance and counterclockwise to decrease it. The bike's resistance is adjustable with infinitely variable speed and multiple gears.
What to do if my Merach MR-S02 is slightly tilted?
If your Merach Exercise Bike is slightly tilted, check whether the four adjusting foot pads at the bottom of the front and rear foot tubes are on the same plane. Adjust and rotate the raised foot pads parallel to the floor.
What to do if my Merach MR-S02 shakes during use?
If your Merach Exercise Bike shakes during use, check whether the front and rear foot tubes are fastened enough.
What to do if the handle of my Merach Exercise Bike shakes slightly?
If the handle of your Merach Exercise Bike shakes slightly, check whether the connecting screws of the handle and the front column tube are firmly fixed and ensure that the retaining knob is locked.
General| Brand | Merach |
|---|---|
| Model | MR-S02 |
| Category | Exercise Bike |
| Language | English |
To Next Page