06
A S S E M B L YI N S T R U C T I O N SA S S E M B L YI N S T R U C T I O N S
ASSEMBLY INSTRUCTIONS
1.Remove the wheel chock bolt locked on
the main frame with A: Allen Key.
2.Place the wheel chock, protective paper
and bolt aside.
(Please store them in a bag as spare)
3.Prepare #7 Front Stabilizer, two #9
Screws and A: Allen Key.
4.Align the holes on #7 Front Stabilizer
and the front bracket on the #1 Main
Frame.
5.Insert two #9 Screws into the holes.
6.Tighten and secure the two #9 Screws
with A: Allen Key.
To Next Page
Loading...