109
Controls in detail
Seats
1 Release button
Removing rear seat head restraints
왘 Fold back head restraint (컄 page 107).
왘 Pull head restraint to its highest
position.
왘 Push release button 1 and pull out
head restraint.
Installing rear seat head restraints
왘 Insert head restraint and push it down
until it engages.
왘 Push button 1 and adjust head
restraint to desired position.
Lumbar support*
The curvature of the driver’s seat can be
adjusted to help enhance lower back sup-
port and seating comfort.
1 Adjustment lever
왘 Move adjustment lever 1 in direction
of arrows until you have reached a
comfortable seating position.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
Do not interchange head restraints from
front and rear seat.
To Next Page
Loading...
Need help?
General
