523
Practical hints
Flat tire
ì™” Flat tire
Preparing the vehicle
왘 Park the vehicle in a safe distance from
moving traffic on a hard, flat surface
when possible.
왘 Turn on the hazard warning flasher
(
컄 page 151).
왘 Turn the steering wheel so that the
front wheels are in a straight-ahead
position.
왘 Set the parking brake (컄 page 60).
왘 Set the automatic transmission to park
position P (
컄 page 194).
왘 Turn off the engine (컄 page 41).
왘 Remove the SmartKey from the starter
switch.
Vehicles with KEYLESS-GO*:
왘 Turn off the engine by pressing the
KEYLESS-GO* button once
(
컄 page 70).
왘 Open the driver’s door (this puts
the starter switch in position 0,
same as with the SmartKey re-
moved from the starter switch). The
driver’s door then can be closed
again.
왘 Remove the KEYLESS-GO*
start/stop button from the starter
switch (
컄 page 43).
왘 Have any passenger exit the vehicle at
a safe distance from the roadway.
Warning! G
The dimensions of the Minispare wheel are
different from those of the road wheels. As
a result, the vehicle handling characteristics
change when driving with a Minispare wheel
mounted. Adapt your driving style accord-
ingly.
The Minispare wheel is for temporary use
only. When driving with a Minispare wheel
mounted, ensure proper tire pressure and
do not exceed a vehicle speed of
50 mph (80 km/h).
Drive to the nearest Mercedes-Benz Light
Truck Center as soon as possible to have the
Minispare wheel replaced with a regular
road wheel.
Never operate the vehicle with more than
one spare wheel mounted.
Do not switch off the ESP
®
when a
Minispare wheel is mounted.
Warning! G
Your vehicle is equipped with air suspen-
sion. Do not open or close any doors or the
tailgate while mounting a spare wheel. The
vehicle could rise or lower to a previously se-
lected level. You or others could be injured
as a result.
i
Open door only when conditions are safe to
do so.
To Next Page
Loading...
Need help?
General
