542
Practical hints
Towing the vehicle
Installing towing eye bolt
Depending on whether you are towing a
vehicle or you are being towed, the towing
eye bolt can be screwed into threaded
holes which are located behind covers on
the right-hand side of each bumper.
1 Cover
1 Cover
Removing cover
왘 Press mark on cover 1 as indicated by
the arrow.
왘 Lift off cover 1 to reveal the threaded
hole for towing eye bolt.
Installing towing eye bolt
왘 Take the towing eye bolt and wheel
wrench from the vehicle tool kit
(
컄 page 495).
왘 Screw towing eye bolt in clockwise to
its stop and tighten with wheel wrench.
Removing towing eye bolt
왘 Loosen towing eye bolt counterclock-
wise with wheel wrench.
왘 Unscrew towing eye bolt.
왘 Store the towing eye bolt and wheel
wrench back into the vehicle tool kit
(
컄 page 495).
Warning! G
In order to avoid possible serious burns or
injury, use extreme caution when removing
the rear cover, because the rear exhaust
pipe is extremely hot.
i
The cover 1 is secured to the bumper by a
plastic cord.
To Next Page
Loading...
Need help?
General
