High-beam headlamps, parking lamps/
standing lamps and daytime running
lamps
View from inside (example: left headlamp)
X
Switch off the lighting system.
X
Open the hood.
X
Turn housing cover : counter-clockwise and
remove it.
X
Pull out the bulb together with bulb holder ;.
X
Insert the new bulb with bulb holder ; and
engage it as far as it will go.
X
Press on housing cover : and turn clockwise
to fasten.
X
Close the hood.
Turn signal lamps
View from inside (example: left headlamp)
X
Switch off the lighting system.
X
Open the hood.
X
Turn bulb holder : counter-clockwise and
remove it.
X
Remove the bulb from bulb holder :.
X
Insert the new bulb into bulb holder :.
X
Insert bulb holder : and turn it clockwise
until it engages.
X
Close the hood.
Side-mounted additional turn signal
lamp
The additional turn signals are mounted on the
side of the vehicle's front fender.
X
Switch off the lighting system.
X
Slide additional turn signal : forwards and
swing it out.
X
Press the bulb to the rear.
X
Applying light pressure to the bulb, turn it
counter-clockwise and remove it from the
bulb holder.
X
Press the new bulb into the bulb holder and
screw it in clockwise.
X
Attach additional turn signal : at the front
and engage.
Replacing the rear lamp clusters
Overview of bulb types
Replacing bulbs
101
Lights and windshield wipers
Z
To Next Page
Loading...
Need help?
General
