Ratchet strap
Tensioning lever fastened in detent position
Always observe the operating instructions or the
notes of the manufacturer for the operation of
the ratchet strap.
X
To release the tensioning lever: press stop
slider = outwards in the direction of the
arrow and swing tensioning lever ; from
detent position 1 to the desired position.
X
To tighten the ratchet strap: release ten-
sioning lever ; and open it.
Threading and tensioning
X
Guide ratchet strap ? through slotted shaft
A from behind as illustrated and tighten it.
X
Swing tensioning lever ; back and forth until
the ratchet strap has wound around slotted
shaft A two to three times.
X
Press stop slider = outwards in the direction
of the arrow and swing tensioning lever ; to
detent position 1.
X
Release stop slider =.
The ratchet is closed and engaged.
Tensioning lever in the release position
X
To release the ratchet strap: release ten-
sioning lever ; and swing it into release
position 7.
Lock stop slider = engages in end recess B
and slotted shaft A can move freely.
X
Pull ratchet strap ? out of the ratchet.
Securing loads
Load protection net
G
WARNING
The load protection net alone cannot restrain
or secure heavy objects, luggage or heavy
loads. In the event of abrupt changes in direc-
tion, braking maneuvers or an accident, you
may be struck by unsecured loads. There is a
risk of injury, possibly even fatal.
Always stow objects in such a way that they
cannot be tossed about. Secure objects, lug-
gage and loads to prevent them slipping or
tipping over, e.g. by lashing them down, even
when using the load protection net.
238
Securing loads
Transporting loads
To Next Page
Loading...
Need help?
General
