X
Using a lug wrench =, loosen the bolts on
the wheel you wish to change by about one
full turn. Do not unscrew the bolts com-
pletely.
Jacking points
X
Position jack A at jacking point ?.
X
Make sure the foot of the jack is directly
beneath the jacking point.
X
Turn crank B clockwise until jack A sits
completely on jacking point ?. The base of
the jack must lie evenly on the ground.
X
Turn crank B until the tire is raised a max-
imum of 1.2 in (3 cm) off the ground.
Removing a wheel
!
AMG vehicle with ceramic brake discs:
during removal and repositioning of the
wheel, the wheel rim can strike the
ceramic-brake disc and damage it. There-
fore, take precautions and have a second
person assist you. Alternatively, you can
use a second alignment bolt.
!
Do not place wheel bolts in sand or on a
dirty surface. The bolt and wheel hub
threads could otherwise be damaged when
you screw them in.
370
Changing a wheel
Wheels and tires
To Next Page
Loading...
Need help?
General
