COMAND Video: COMAND sends the
video picture to the RSE system.
Operation with Active Source from
COMAND
Audio or Video that is active in COMAND can
also be played back via the RSE system.
X
Switch to the desired Audio mode or
display the menu system in Video mode on
COMAND.
X
Select the menu item on the left below, e.g.
CD if COMAND is in CD mode.
X
Select Active Source for the Rear.
In the status line you will see the headset
symbol and the symbol _ indicating the
active mode.
If you change the mode in COMAND, the new
mode is also played back via the RSE system.
The display changes accordingly.
X
To switch off the function in COMAND:
Switch to the desired audio mode in
COMAND or call up the menu system when
in video mode.
X
Select the menu item on the left below, e.g.
CD if CD mode is selected.
X
Select Rear Audio Off.
Setting the Brightness/Contrast/
Color
X
In the AUX menu, select Display Aux or
Drive Aux.
X
Select Brightness, Contrast or Color.
A setting scale appears.
X
To adjust setting: Press ∆ or ∇.
X
To confirm setting: Press 9.
Changing the Picture Format
X
In the AUX menu, select Display Aux or
Drive Aux.
The ä icon in front of one of these menu
items: 16:9 optimized, 4:3 or Wide
Screen indicates the currently selected
format.
X
To switch formats: Press ∆ or ∇ until the
desired format is selected.
X
To save setting: Press 9.
Aux Operation
181
Rear Seat Entertainment
Z
To Next Page
Loading...
Need help?
General