Emergency
Removing the safety vest
There is a safety vest compartment in the stow-
age compartments of all doors for storing a safety
vest.
#
To remove: pull out safety vest bag 1 by loop
2.
#
Open safety vest bag 1 and pull out the
safety vest.
#
To stow: fold the reective safety jacket, roll it
up and stow it in safety jacket bag 1.
#
Slide safety jacket bag 1 along the lower
edge of the armrest into the safety jacket
compartment. Meanwhile, ensure that loop
2 hangs out well within reach.
%
Remove a new reective safety jacket from its
packaging material before sliding it into the
safety jacket compartment. The packaging
material may otherwise cause it to slip out or
make removing it dicult.
Observe the legal requirements in each coun-
try.
1
Maximum number of washes
2
Maximum wash temperature
3
Do not bleach
4
Do not iron
5
Do not tumble dry
6
Do not dry clean
7
Class 2 safety vest
The requirements dened by the legal standard
are only fullled if the safety vest is the correct
size and is fully closed.
Replace the safety vest in the following cases:
R
The reective strips are damaged or dirty
350
Breakdown assistance
To Next Page
Loading...
Need help?
General
