#
Tighten the wheel bolts evenly in a diagonal
pattern in the order indicated 1 to 5 with
an initial maximum force of 59 lb- (80 Nm).
#
Tighten the wheel bolts evenly in a diagonal
pattern in the order indicated 1 to 5 with
the specied tightening torque of 111 lb-
(150 Nm).
&
WARNING Risk of accident due to incor-
rect tightening torque
The wheels could come loose if the wheel
bolts or wheel nuts are not tightened to the
prescribed torque.
#
Ensure that the wheel bolts or wheel
nuts are tightened to the prescribed
tightening torque.
#
If you are not sure, do not move the vehi-
cle. Contact a qualied specialist work-
shop and have the tightening torque
checked immediately.
#
Check the tire pressure of the newly installed
wheel and adjust it if necessary.
%
The following does not apply if the new wheel
is an emergency spare wheel.
#
Vehicles with a tire pressure loss warning sys-
tem: restart the tire pressure loss warning sys-
tem (/ page 382).
#
Vehicles with a tire pressure monitoring sys-
tem: restart the tire pressure monitoring sys-
tem (/ page 381).
Emergency spare wheel
Notes on the emergency spare wheel
&
WARNING Risk of accident caused by
incorrect wheel and tire dimensions
The wheel or tire sizes and the tire type of the
emergency spare wheel or spare wheel and
the wheel to be replaced may dier. The emer-
gency spare wheel or spare wheel can signi-
cantly impair driving characteristics of the
vehicle.
To prevent hazardous situations:
#
Drive carefully.
#
Never install more than one emergency
spare wheel or spare wheel that diers
in size.
#
Only use an emergency spare wheel or
spare wheel briey.
#
Do not deactivate ESP
®
.
#
Have the emergency spare wheel or
spare wheel of a dierent size replaced
at the nearest qualied specialist work-
404
Wheels and tires
To Next Page
Loading...
Need help?
General
